English Contact Us
Lead-free Wave Solder
Lead-free Reflow Oven
Curing Oven
AOI and Printer
PCB Handling Conveyors
Dross Separator
Pick & Place Machine
About Us
Certification and Qualifications
jobin Us
Contact Us
procduct >Lead-free Wave Solder>Lead Free Wave Solder Machine S400
Lead Free Wave Solder Machine S400

S400 Lead Free Wave Solder Machine Features

A new streamline design replaces a conventional right-angled exterior. And the design is based on mechanical aesthetics and practicability, making the maintenance an easy job.

PLC controller, PC and on-line UPS form a stable,safe and efficient controlling system.

The software has the functions like PCB counting, temperature setting and editing, PCB parameter menu, and profile testing, alarms and muti-languages conversion. In the meanwhile, the software has make a lots effect about the safety issues just like wave motor running safe temperature etc.

The one-week timer will provide a amazing function for customer. The operator can edit his work schedule for this wave solder machine weekly. And the machine can turn on automatically to melt the solder before operator come to work. When its time to work, the solder has been melt and everything is ready. It will save about 1.5 hours for customer everyday.

The specially designed guiding rail reduce the deformation caused by heat; After two years working you only need to change the cooper bars instead of change the whole conveyor rails.

Sprayer droved by stepper motor , the speed can be set on PC. The moving and stopping time will be set in a more precious way.

The sprayer is made in Japan; it provides perfect atomization performance of the flux.

Adding flux automatically, there are two sensors on flux tank. When flux is lower than limit,it will switch on the pump to feed flux in automatically. Operator just need to put the whole barrel flux into the flux tank, meanwhile put the sucking tube into the barrel.

Forced air convection preheat zone control by temperature controller in PID model. The preheat zone will provide enough uniform heat for the PCB.

3 individual bottom hot air zone and third upper hot air zone optional, this configuration will provide the greatest preheating effect for soldering.

Adopt cast iron heater for the solder pot, its mounted outside of the solder pot. This new assembling way will prolong the life of the solder pot.

Dual wave solder. Both wave heights are controlled by transducer. Changing the wave height via adjusting the frequency of power.

Solder pot is made of 3mm thickness Ti material. Long life warranty.

High quality B&M wave motor which made in Italian, small noise and more stable.

Solder pot can lift up and down, move in and out automatically. Its very easy for customer to change solder pot and conversion between leaded and lead-free.

S400 Lead Free Wave Solder Machine Specifications

S400 - Specifications



 PCB width


 Solder pot capacity


 Running power/general power


 Machine dimension


 Net weight


 Controlling system


 Conveyor motor

 3Ph 220V , 90W

 Conveyor speed


 Alcohol capacity

 4.5 liters

 Conveyor direction

 Left to right

 Spray method

 stepper motor and slider moving sprayer


 Japan ST-6

 Preheating zone

 3 individual bottom preheating zones

 Preheating power


 Solder pot material

 Fully Ti

 Solder pot heater

 Cast iron

 Heater power


 Wave number

 dual waves

 Wave type

 Turbulence first wave and Lambda 2nd wave

 Melting time

 110 minutes

 Solder pot lift up&down

 Electrical switch

 Solder pot in&out

 Electrical switch

 Finger cleaning pump

 1PH 220V 10W

 Finger type

 Dual hook Or L finger

 Finger material


 Solder angle


 Air supply


 Power supply

 3PH 380V 50HZ

CopyrightDektec Automation Equipment Co., Ltd  ICP05014378  SupportQsyes